Hitachi Vantara HQT-6712 Certification Exam Sample Questions and Answers

Global-Active Device Management Dumps, HQT-6712 Dumps, Hitachi Vantara Global-Active Device Management PDF, HQT-6712 PDF, Global-Active Device Management VCE, Hitachi Vantara Global-Active Device Management Questions PDF, Hitachi Vantara Exam VCE, Hitachi Vantara HQT-6712 VCE, Global-Active Device Management Cheat SheetBefore you write the Hitachi Vantara Global-Active Device Management (HQT-6712) certification exam, you may have certain doubts in your mind regarding the pattern of the test, the types of questions asked in it, the difficulty level of the questions and time required to complete the questions. These Hitachi Vantara Qualified Professional - Global-Active Device Management sample questions and demo exam help you in removing these doubts and prepare you to take the test.

The best approach to pass your Hitachi Vantara HQT-6712 exam is to challenge and improve your knowledge. To test your learning and identify improvement areas with actual exam format, we suggest you practice with Premium Hitachi Vantara HQT-6712 Certification Practice Exam. The practice test is one of the most important elements of your Hitachi Vantara Global-Active Device Management Professional exam study strategy to discover your strengths and weaknesses, to improve your time management skills and to get an idea of the score you can expect.

Hitachi Vantara HQT-6712 (Global-Active Device Management) Sample Questions:

01. During monitoring, a volume in a GAD pair reports I/O mode Block and the host can no longer see it on that path. What does Block indicate about that volume?
a) The volume is performing a full initial copy and is temporarily busy
b) The volume is now the quorum and no longer stores host data
c) The volume has temporarily switched to asynchronous replication to ride out a slow inter-site link
d) The volume is hidden from hosts and its path is blocked
 
02. When provisioning a GAD pair through Ops Center Administrator, the administrator selects a resource scope for the new pair. Which selection scopes the pair correctly?
a) The Virtual Storage Machine and resource group holding the GAD volumes
b) A consistency group spanning both of the arrays
c) The quorum disk's own resource group, used as the container that scopes the pair's volumes
d) A Universal Replicator journal group created for the pair
 
03. Over the Configuration Manager REST API, an administrator must resync a pair from the secondary and reverse roles so the former S-VOL becomes primary. Which request detail accomplishes the role-reversing resync?
a) A request creating a journal resource to carry the reversed direction
b) A request setting the fence level to data on the pair resource
c) A delete request on the pair followed by a fresh create in reverse
d) A resync request from the secondary specifying doSwapSvol set to true
 
04. After paircreate completes, an administrator wants to confirm the pair is operating normally. Which two indications together confirm a healthy, synchronised GAD pair?
(Choose two.)
a) The I/O mode is Block (B/B)
b) The pair status is PSUE
c) The I/O mode is Mirror(RL)
d) The fence level has changed to DATA
e) The pair status is PAIR
 
05. Ops Center Automator offers service templates to move volumes between VSP systems using a temporary GAD pair. What is this capability called?
a) Journal-Based Data Shipping between the sites
b) Online Migration with Configuration Manager
c) Snapshot Replication Service for point-in-time copies
d) Offline Volume Export, which copies the data while the host is shut down
 
06. Following a takeover where the S-VOL became writable, the original primary system is repaired and the administrator wants to return to normal operation. What does the recovery involve?
a) Re-creating the quorum because a takeover always invalidates it
b) Leaving the pair in SSWS permanently, since the S-VOL is now the authoritative copy
c) Resynchronise so the volumes mirror again, then swap roles back if required
d) Reformatting the repaired P-VOL before it can rejoin the pair
 
07. An administrator wants to release a GAD configuration from Ops Center Protector management while leaving the pairs running. Which Protector action does this?
a) Suspend the policy, which detaches the pairs permanently
b) Dissociate the replication from Protector
c) Delete the data flow, which also deletes the pairs
d) Adopt the replication into Protector
 
08. Through the Configuration Manager REST API, a long-running GAD operation such as a pair create does not complete within the initial response. How does the API represent such operations?
a) As an asynchronous job the client polls for completion status
b) As an event written to the quorum disk for the client to read
c) As a CCI pairevtwait invoked internally by the API
d) As a synchronous call that blocks until the pair reaches PAIR
 
09. Before the Configuration Manager REST API can operate on GAD pairs across the two arrays, the arrays themselves must be known to it. What step makes that possible?
a) Mounting a command device (LUN) from each array, with a HORCM instance, onto the API server
b) Placing both arrays' serial numbers on the quorum disk
c) Adding both arrays to a Universal Replicator journal group
d) Registering both storage systems with the Configuration Manager API
 
10. The primary system is down and the administrator has driven the S-VOL to the writable takeover state so the host can run on the secondary. Which pair status reflects that S-VOL takeover?
a) SSWS
b) SMPL
c) COPY
d) PSUS

Solutions:

Question: 01

Answer: d

Question: 02

Answer: a

Question: 03

Answer: d

Question: 04

Answer: c, e

Question: 05

Answer: b

Question: 06

Answer: c

Question: 07

Answer: b

Question: 08

Answer: a

Question: 09

Answer: d

Question: 10

Answer: a

Note: If you find any error in these Hitachi Vantara Global-Active Device Management Professional sample questions, you can update us by write an email on feedback@nwexam.com.

Rating: 5 / 5 (76 votes)