Cisco 300-110 Certification Sample Questions and Answers

Cisco 300-110 sample questions for Cisco Certified Specialist - Wireless Design preparationThe Cisco 300-110 Certification Sample Questions on this page help you become familiar with the question style and knowledge areas of the Cisco Certified Specialist - Wireless Design (WLSD) exam. Each question is written to reflect the syllabus topics and the level of understanding the certification expects, so you can see how theoretical concepts are tested in practice. Working through them lets you check your understanding, identify topics that need further study, and get comfortable interpreting certification-style questions before you sit the official exam.

These free sample questions are a useful starting point, but they cover only a small part of complete preparation. Reading the documentation, completing recommended training, and gaining hands-on experience build the underlying knowledge required for the certification. Structured practice then shows how well you can recall and apply that knowledge to exam-oriented questions, and reviewing the explanation for each answer helps you understand why a particular option is correct. As your preparation progresses, timed practice helps you develop pacing, sharpen question interpretation, and make confident decisions under exam conditions. Combining these approaches over several study sessions gives you a realistic measure of your readiness ahead of the Cisco Certified Specialist - Wireless Design exam.

Try Demo Exam »  |  Access Premium Practice »

The Demo Exam lets you try the NWExam interface, question presentation, and timed practice environment for free before purchasing. Premium Practice is built for complete exam preparation: it gives you the full practice question set for your certification, full-length and mini timed sessions, unlimited attempts for 60 days, and a saved attempt history so you can review progress over time. In short, the demo shows you how the platform works, while Premium supports repeated self-assessment throughout your preparation.

Cisco 300-110 (WLSD) Sample Questions:

01. Each country has its own regulations governing the RF spectrum, often limiting the scope of what the standard enables globally. Which two regulatory bodies define the spectrum rules commonly followed in the United States and in Europe?
a) European Telecommunications Standards Institute (ETSI)
b) Telecom Engineering Center (Telec)
c) Computer Society of United States
d) Federal Communications Commission (FCC)
 
02. A Cisco wireless network can support _____, which is a standards-based method of assisted roaming.
a) 802.11k
b) 802.11w
c) 802.11y
d) 802.11z
 
03. To derive a fairly accurate location, multiple APs must receive a signal from a client device or tag at an RSSI above a minimum signal level of _____ dBm.
a) –60
b) –70
c) –75
d) –65
 
04. During a pre-site survey, you were informed that no AP onsite uses the UNII-2B band. Should you consider this band for an outdoor building-to-building (point-to-point, or P2P) connection?
a) Yes, the band is allowed for P2P. However, it cannot be used for P2MP connections.
b) No, the band is not allowed for any 802.11 use.
c) No, the band is only allowed for indoor use.
d) Yes; however, the band could not be used for indoor use.
 
05. When you need an AP deployment that supports voice and video, what should be the primary design goals?
a) Wireless coverage and wireless capacity
b) Wired cabling and rack space
c) DNS redundancy and NAT optimization
d) Hyperlocation and guest bridging
 
06. How many MAC addresses are used in a frame sent from a MAP to a RAP?
a) Two
b) Three
c) Four
d) Five
 
07. Why should you limit the height at which APs are mounted, for indoor location services?
a) As height increases, maintenance becomes more difficult and costly, maximizing the risk of poor location quality.
b) As height increases, signal gets weaker, resulting in poorer accuracy.
c) As height increases, channel utilization increases, limiting the number of possible tracked clients.
d) As height increases, signal frequency decreases, increasing the risk of reaching licensed/unauthorized frequencies.
 
08. Compared to typical client devices, what enhanced characteristics do wireless access points (APs) have?
a) More powerful transmitters
b) Better antennas
c) Better receivers
d) All of these
 
09. What is an important consideration when designing radio management for a wireless network?
a) The physical dimensions of the access points
b) The maximum data transfer rate supported by the access points
c) The frequency band and channel allocation for APs
d) The number of available IP addresses in the network
 
10. Which application would be the most appropriate use for an AP model that has internal antennas?
a) A location where a relatively wide coverage area is desired
b) A location where coverage is needed toward one side of the AP
c) A location where an omnidirectional antenna is not desirable
d) A location where a patch antenna's pattern is required

Solutions:

Question: 01

Answer: a, d

Question: 02

Answer: a

Question: 03

Answer: c

Question: 04

Answer: b

Question: 05

Answer: a

Question: 06

Answer: c

Question: 07

Answer: b

Question: 08

Answer: d

Question: 09

Answer: c

Question: 10

Answer: a

For broader timed practice across the Cisco WLSD certification objectives, explore the Premium Cisco 300-110 Practice Exam. It complements your study resources by giving you repeated opportunities to apply what you have learned under exam-oriented conditions.

For the latest exam objectives, certification requirements, registration information, and vendor updates, refer to the official 300-110 exam page.

Note: These are independently developed practice questions created for study and familiarization. They are not official Cisco exam questions or recalled content from a live certification exam. If you find a typo or data entry error in these Designing Cisco Wireless Networks (300-110) sample questions, please let us know at feedback@nwexam.com.

Rating: 4.7 / 5 (93 votes)