H3C GB0-382 Certification Exam Sample Questions and Answers

Advanced Routing and Switching Technology Dumps, GB0-382 Dumps, H3C H3CSE-RS+ PDF, GB0-382 PDF, Advanced Routing and Switching Technology VCE, H3C Advanced Routing and Switching Technology Questions PDF, H3C Exam VCE, H3C GB0-382 VCE, Advanced Routing and Switching Technology Cheat SheetBefore you write the H3C Advanced Routing and Switching Technology (GB0-382) certification exam, you may have certain doubts in your mind regarding the pattern of the test, the types of questions asked in it, the difficulty level of the questions and time required to complete the questions. These H3C Certified Senior Engineer for Routing & Switching Plus (H3CSE-RS+) sample questions and demo exam help you in removing these doubts and prepare you to take the test.

The best approach to pass your H3C GB0-382 exam is to challenge and improve your knowledge. To test your learning and identify improvement areas with actual exam format, we suggest you practice with Premium H3C GB0-382 Certification Practice Exam. The practice test is one of the most important elements of your H3C Advanced Routing and Switching Technology 2 (H3CSE-RS+) exam study strategy to discover your strengths and weaknesses, to improve your time management skills and to get an idea of the score you can expect.

H3C GB0-382 (H3CSE-RS+) Sample Questions:

01. Configure the silent interface on the router so that the router does not send OSPF protocol messages. The command is _______.
a) RTA-ospf-1]silent-interface serial2/0
b) RTA-ospf-1-area-0.0.0.1]silent-interface serial2/0
c) RTA-Serial2/0]silent-interface
d) RTA-ospf]silent-interface serial2/0
 
02. ______ uses the Shortest Path First (SPF) algorithm.
a) RIP
b) OSPF
c) IS-IS
d) BGP
 
03. LSAs of type ______ may be injected into the OSPF TotallStub area.
a) Tpe1
b) Tpe4
c) Tpe2
d) Tpe5
 
04. What kinds of ICMPv6 messages are used in the duplicate address detection process of the ND protocol?
a) Neighbor Advertisement
b) Router Solicitation
c) Redirect
d) Neighbor Solicitation
e) Router Advertisement
 
05. OSPF protocol does not belong to the function of Hello packet, which is _________.
a) Negotiate DR/BDR
b) establish neighbor relationship
c) Exchange LSA Summary Information
d) Acknowledge the received LSU message
 
06. SOA-based network architecture divides enterprise IT systems into which of the following layers?
(Select one or more)
a) Network layer
b) application layer
c) session layer
d) Infrastructure layer
 
07. There are two detailed routes 10.10.1.0/24 and 10.10.2.0/24 in the BGP routing table. The user requests to advertise 10.10.1.0/24 and the aggregated route 10.10.0.0/16, but not 10.10.2.0/24. How to achieve?
a) acl number 2000 rule permit source 10.10.2.0 0.0.0.255 bgp 100 aggregate 10.10.0.0 255.255.0.0 suppress-policytest route-policytest dennode 10 if-match acl 2000 route-policytest permit node 20
b) acl number 2000 rule permit source 10.10.2.0 0.0.0.255 bgp 100 aggregate 10.10.0.0 255.255.0.0 origin-policytest route-policytest dennode 10 if-match acl 2000 route-policytest permit node 20
c) acl number 2000 rule permit source 10.10.2.0 0.0.0.255 bgp 100 aggregate 10.10.0.0 255.255.0.0 origin-policytest route-policytest permit node 10 if-match acl 2000
d) acl number 2000 rule permit source 10.10.2.0 0.0.0.255 bgp 100 aggregate 10.10.0.0 255.255.0.0 suppress-policytest route-policytest permit node 10 if-match acl 2000
 
08. Which of the following statements is incorrect about filter-policy filters?
a) RIP routing information received from neighbors can be filtered using filter-policy in RIP
b) The entire IP routing table sent to neighbors can be filtered using filter-policy in RIP
c) IS-IS routing information received from neighbors can be filtered using filter-policy in IS-IS
d) You can use filter-policy in OSPF to filter routing information between areas
 
09. The figure shows an OSI routing network. The route between RTB and RTE in the figure should be _______ route.
a) Level-3
b) Level-2
c) Level-1
d) Level-0
 
10. For NSAP area addresses in IS-IS, which of the following statements is true ________.
a) The NSAP area address is used to identify the area in the routing domain
b) In NSAP address 12.3456.7890.abcd.ef, the zone address is 12
c) In NSAP address 12.3456.7890.abcd.ef, the zone address is 12.3456
d) A router can be configured with up to 3 NSAP area addresses, usually only 1

Solutions:

Question: 01

Answer: a

Question: 02

Answer: b, c

Question: 03

Answer: a, c

Question: 04

Answer: a, d

Question: 05

Answer: c, d

Question: 06

Answer: b, d

Question: 07

Answer: d

Question: 08

Answer: c, d

Question: 09

Answer: b

Question: 10

Answer: a, b, d

Note: If you find any error in these H3C Advanced Routing and Switching Technology 2 (H3CSE-RS+) sample questions, you can update us by write an email on feedback@nwexam.com.

Rating: 5 / 5 (76 votes)