A great way to start the Cisco Certified Design Associate (DESGN) preparation is to begin by properly appreciating the role that syllabus and study guide play in the Cisco 200-310 certification exam. This study guide is an instrument to get you on the same page with Cisco and understand the nature of the Cisco CCDA exam.
Our team of experts has composed this Cisco 200-310 exam preparation guide to provide the overview about Cisco Designing for Cisco Internetwork Solutions exam, study material, sample questions, practice exam and ways to interpret the exam objectives to help you assess your readiness for the Cisco DESGN exam by identifying prerequisite areas of knowledge. We recommend you to refer the simulation questions and practice test listed in this guide to determine what type of questions will be asked and the level of difficulty that could be tested in the Cisco CCDA certification exam.
Cisco 200-310 Exam Overview:
|
Exam Name
|
Designing for Cisco Internetwork Solutions |
| Exam Number | 200-310 DESGN |
| Exam Price | $300 USD |
| Duration | 75 minutes |
| Number of Questions | 55-65 |
| Passing Score | Variable (750-850 / 1000 Approx.) |
| Recommended Training |
Designing for Cisco Internetwork Solutions (DESGN) Designing for Cisco Internetwork Solutions (DESGN) E-Learning |
| Exam Registration | PEARSON VUE |
| Sample Questions | Cisco 200-310 Sample Questions |
| Practice Exam | Cisco Certified Design Associate Practice Test |
Cisco 200-310 Exam Topics:
| Section | Weight | Objectives |
|---|---|---|
| Design Methodologies | 15% |
1 Describe the Cisco Design lifecycle – PBM (plan, build, manage)
2 Describe the information required to characterize an existing network as part of the planning for a design change
3 Describe the use cases and benefits of network characterization tools (SNMP, NBAR, NetFlow)
4 Compare and contrast the top-down and bottom-up design approaches
|
| Design Objectives | 20% |
1 Describe the importance and application of modularity in a network
2 Describe the importance and application of hierarchy in a network
3 Describe the importance and application of scalability in a network
4 Describe the importance and application of resiliency in a network
5 Describe the importance and application of concept of fault domains in a network
|
| Addressing and Routing Protocols in an Existing Network | 20% |
1 Describe the concept of scalable addressing
a) Hierarchy
b) Summarization
c) Efficiency
2 Design an effective IP addressing scheme
a) Subnetting
b) Summarization
c) Scalability
d) NAT
3 Identify routing protocol scalability considerations
a) Number of peers
b) Convergence requirements
c) Summarization boundaries and techniques
d) Number of routing entries
e) Impact of routing table of performance
f) Size of the flooding domain
g) Topology
4 Design a routing protocol expansion
a) IGP protocols (EIGRP, OSPF, ISIS)
b) BGP (eBGP peering, iBGP peering
|
| Enterprise Network Design | 20% |
1 Design a basic campus
a) Layer 2/Layer 3 demarcation
b) Spanning tree
c) Ether channels
d) First Hop Redundancy Protocols (FHRP)
e) Chassis virtualization
2 Design a basic enterprise network
a) Layer 3 protocols and redistribution
b) WAN connectivity
b(i) Topologies (hub and spoke, spoke to spoke, point to point, full/partial mesh)
b(ii) Connectivity methods (DMVPN, get VPN, MPLS Layer 3 VPN, Layer 2 VPN, static IPsec, GRE,VTI)
b(iii) Resiliency (SLAs, backup links, QoS)
c) Connections to the data center
d) Edge connectivity
d(i) Internet connectivity
d(ii) ACLs and firewall placements
d(iii) NAT placement
3 Design a basic branch network
a) Redundancy
a(i) Connectivity
a(ii) Hardware
a(iii) Service provider
b) Link capacity
b(i) Bandwidth
b(ii) Delay
|
| Considerations for Expanding an Existing Network | 25% |
1 Describe design considerations for wireless network architectures
a) Physical and virtual controllers
b) Centralized and decentralized designs
2 Identify integration considerations and requirements for controller-based wireless networks
a) Traffic flows
b) Bandwidth consumption
c) AP and controller connectivity
d) QoS
3 Describe security controls integration considerations
a) Traffic filtering and inspection
b) Firewall and IPS placement and functionality
4 Identify traffic flow implications as a result of security controls
a) Client access methods
b) Network access control
5 Identify high-level considerations for collaboration (voice, streaming video, interactive video) applications
a) QoS (shaping vs. policing, trust boundaries, jitter, delay, loss)
b) Capacity
c) Convergence time
d) Service placement
6 Describe the concepts of virtualization within a network design
7 Identify network elements that can be virtualized
a) Physical elements (chassis, VSS, VDC, contexts)
b) Logical elements (routing elements, tunneling, VRFs, VLANs)
8 Describe the concepts of network programmability within a network design
a) APIs
b) Controllers
c) Application Centric Infrastructure (ACI)
9 Describe data center components
a) Server load balancing basics
b) Blocking vs. non-blocking Layer 2
c) Layer 2 extension
|
Cisco DESGN Exam Description:
The Designing for Cisco Internetwork Solutions (DESGN) exam (200-310) is a 75- minute assessment with 55–65 questions that are associated with the Cisco CCDA® Design certification.