A great way to start the Cisco Certified Network Professional Routing and Switching (ROUTE) preparation is to begin by properly appreciating the role that syllabus and study guide play in the Cisco 300-101 certification exam. This study guide is an instrument to get you on the same page with Cisco and understand the nature of the Cisco CCNP Routing and Switching exam.
Our team of experts has composed this Cisco 300-101 exam preparation guide to provide the overview about Cisco Implementing Cisco IP Routing exam, study material, sample questions, practice exam and ways to interpret the exam objectives to help you assess your readiness for the Cisco ROUTE exam by identifying prerequisite areas of knowledge. We recommend you to refer the simulation questions and practice test listed in this guide to determine what type of questions will be asked and the level of difficulty that could be tested in the Cisco CCNP Routing and Switching certification exam.
Cisco 300-101 Exam Overview:
|
Exam Name
|
Implementing Cisco IP Routing |
| Exam Number | 300-101 ROUTE |
| Exam Price | $300 USD |
| Duration | 120 minutes |
| Number of Questions | 45-55 |
| Passing Score | Variable (750-850 / 1000 Approx.) |
| Recommended Training |
Implementing Cisco IP Routing v2.0 (ROUTE) Cisco E-Learning for CCNP ROUTE v2.0 Cisco Learning Labs for CCNP ROUTE v2.0 CCNA and CCNP Premium Training Package |
| Exam Registration | PEARSON VUE |
| Sample Questions | Cisco 300-101 Sample Questions |
| Practice Exam | Cisco Certified Network Professional Routing and Switching Practice Test |
Cisco 300-101 Exam Topics:
| Section | Weight | Objectives |
|---|---|---|
| Network Principles | 10% |
1 Identify Cisco Express Forwarding concepts
a) FIB
b) Adjacency table
2 Explain general network challenges
a) Unicast
b) Out-of-order packets
c) Asymmetric routing
3 Describe IP operations
a) ICMP Unreachable and Redirects
b) IPv4 and IPv6 fragmentation
c) TTL
4 Explain TCP operations
a) IPv4 and IPv6 (P)MTU
b) MSS
c) Latency
d) Windowing
e) Bandwidth-delay product
f) Global synchronization
5 Describe UDP operations
a) Starvation
b) Latency
6 Recognize proposed changes to the network
a) Changes to routing protocol parameters
b) Migrate parts of the network to IPv6
c) Routing protocol migration
|
| Layer 2 Technologies | 10% |
1 Configure and verify PPP
a) Authentication (PAP, CHAP)
b) PPPoE (client side only)
2 Explain Frame Relay
a) Operations
b) Point-to-point
c) Multipoint
|
| Layer 3 Technologies | 40% |
1 Identify, configure, and verify IPv4 addressing and subnetting
a) Address types (Unicast, broadcast, multicast, and VLSM)
b) ARP
c) DHCP relay and server
d) DHCP protocol operations
2 Identify IPv6 addressing and subnetting
a) Unicast
b) EUI-64
c) ND, RS/RA
d) Autoconfig (SLAAC)
e) DHCP relay and server
f) DHCP protocol operations
3 Configure and verify static routing
4 Configure and verify default routing
5 Evaluate routing protocol types
a) Distance vector
b) Link state
c) Path vector
6 Describe administrative distance
7 Troubleshoot passive interfaces
8 Configure and verify VRF lite
9 Configure and verify filtering with any protocol
10 Configure and verify redistribution between any routing protocols or routing sources
11 Configure and verify manual and autosummarization with any routing protocol
12 Configure and verify policy-based routing
13 Identify suboptimal routing
14 Explain ROUTE maps
15 Configure and verify loop prevention mechanisms
a) Route tagging and filtering
b) Split-horizon
c) Route poisoning
16 Configure and verify RIPv2
17 Describe RIPng
18 Describe EIGRP packet types
19 Configure and verify EIGRP neighbor relationship and authentication
20 Configure and verify EIGRP stubs
21 Configure and verify EIGRP load balancing
a) Equal cost
b) Unequal cost
22 Describe and optimize EIGRP metrics
23 Configure and verify EIGRP for IPv6
24 Describe OSPF packet types
25 Configure and verify OSPF neighbor relationship and authentication
26 Configure and verify network types, area types, and router types
a) Point-to-point, multipoint, broadcast, nonbroadcast
b) LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub
c) Internal router, backbone router, ABR, ASBR
d) Virtual link
27 Configure and verify OSPF path preference
28 Configure and verify OSPF operations
29 Configure and verify OSPF for IPv6
30 Describe, configure, and verify BGP peer relationships and authentication
a) Peer group
b) Active, passive
c) States and timers
31 Configure and verify eBGP (IPv4 and IPv6 address families)
a) eBGP
b) 4-byte AS number
c) Private AS
32 Explain BGP attributes and best-path selection
|
| VPN Technologies | 10% |
1 Configure and verify GRE
2 Describe DMVPN (single hub)
3 Describe Easy Virtual Networking (EVN)
|
| Infrastructure Security | 10% |
1 Describe IOS AAA using local database
2 Describe device security using IOS AAA with TACACS+ and RADIUS
a AAA with TACACS+ and RADIUS
b Local privilege authorization fallback
3 Configure and verify device access control
a Lines (VTY, AUX, console)
b Management plane protection
c Password encryption
4 Configure and verify router security features
a IPv4 access control lists (standard, extended, time-based)
b IPv6 traffic filter
c Unicast reverse path forwarding
|
| Infrastructure Services | 20% |
1 Configure and verify device management
a) Console and VTY
b) Telnet, HTTP, HTTPS, SSH, SCP
c) (T)FTP
2 Configure and verify SNMP
a) v2
b) v3
3 Configure and verify logging
a) Local logging, syslog, debugs, conditional debugs
b) Timestamps
4 Configure and verify Network Time Protocol (NTP)
a) NTP master, client, version 3, version 4
b) NTP authentication
5 Configure and verify IPv4 and IPv6 DHCP
a) DHCP client, IOS DHCP server, DHCP relay
b) DHCP options (describe)
6 Configure and verify IPv4 Network Address Translation (NAT)
a) Static NAT, dynamic NAT, PAT
7 Describe IPv6 NAT
a) NAT64
b) NPTv6
8 Describe SLA architecture
9 Configure and verify IP SLA
a) ICMP
10 Configure and verify tracking objects
a) Tracking objects
b) Tracking different entities (for example, interfaces, IPSLA results)
11 Configure and verify Cisco NetFlow
a) NetFlow v5, v9
b) Local retrieval
c) Export (configuration only)
|
Cisco ROUTE Exam Description:
Implementing Cisco IP Routing (ROUTE 300-101) is a 120-minute qualifying exam with 50‒60 questions for the Cisco CCNP Routing and Switching and CCDP certifications.